740 EJ Articulated Truck
US
Metric
Overview
The Cat 740 EJ with a 23 m³ (30.1 yd³) 38 tonnes (42 tons) capacity brings a new level of operator comfort and features to the market in addition to the durability, high productivity and lower operating costs Cat Articulated Trucks are known for. The all-new operator cabin is a leap into the next generation for Articulated Trucks, providing our operators the best place to help build the future.
Engine
Engine Model
Cat® C18 ACERT™
Gross Power – SAE J1995
511.00 hp
381.00 kW
Net Power – SAE J1349
496.00 hp
370.00 kW
Bore
5.70 in
145.00 mm
Stroke
7.20 in
183.00 mm
Displacement
1106.00 in3
18.10 L
Engine Model – U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014, Korea Tier 4 Final
Cat C18 ACERT
Net Power – ISO 14396
504.00 hp
376.00 kW
Weights
Rated Payload
42.00 ton (US)
38.00 t
Body Capacities
Heaped (SAE 2:1)
30.10 yd³
23.00 m³
Struck
23.50 yd³
18.00 m³
Transmission
Forward 1
3.80 mph
6.10 km/h
Forward 2
5.00 mph
8.10 km/h
Forward 3
7.00 mph
11.20 km/h
Forward 4
8.80 mph
14.10 km/h
Forward 5
11.60 mph
18.70 km/h
Forward 6
14.20 mph
22.90 km/h
Forward 7
19.60 mph
31.50 km/h
Reverse - 1
4.00 mile/h
6.40 km/h
Reverse - 2
9.10 mile/h
14.60 km/h
Operating Weights
Front Axle - Empty
44849.00 lb
20343.00 kg
Center Axle - Empty
17095.00 lb
7754.00 kg
Rear Axle - Empty
16515.00 lb
7491.00 kg
Total - Empty
78623.00 lb
35663.00 kg
Front Axle - Rated Load
3534.00 lb
1603.00 kg
Center Axle - Rated Load
40120.00 lb
18198.00 kg
Rear Axle - Rated Load
40120.00 lb
18198.00 kg
Total - Rated Load
83776.00 lb
38000.00 kg
Front Axle - Loaded
48548.00 lb
22021.00 kg
Center Axle - Loaded
57214.00 lb
25952.00 kg
Rear Axle - Loaded
56637.00 lb
25690.00 kg
Total - Loaded
162399.00 lb
73663.00 kg
Body Plate
Type
High Strength Brinell HB450 Wear Resistant Steel
Service Refill Capacities
Fuel Tank
145.30 gal
550.00 L
DEF Tank
5.30 gal
25.00 L
Cooling System
23.70 gal
90.00 L
Engine Crankcase
13.70 gal (US)
52.00 l
Steering/Hoist Hydraulic System
36.90 gal
140.00 L
Engine Crankcase
13.70 gal
52.00 L
Transmission/OTG
19.80 gal
75.00 L
Sound Levels
Interior Cab
72.00 dB(A)
72.00 dB(A)
Standards
Brakes
ISO 3450 – 2011
Cab - FOPS
ISO 3449 Level II – 2005
Cab - ROPS
ISO 3471 – 2008
Steering
ISO 5010 – 2007
Steering
Lock to Lock
4.8 seconds @ 60 rpm
Turning Circle
Note
Dimensions are for machines equipped with 29.5R25 tires.
Turning Dimensions - Aisle Width
233.00 in
5925.00 mm
45 deg
Turning Dimensions - Clearance Radius
356.00 in
9045.00 mm
Turning Dimensions - Inside Radius
173.00 in
4413.00 mm
Turning Dimensions - SAE Turning Radius
339.00 in
8624.00 mm
Turning Dimensions: Aisle Width
233.00 in
5925.00 mm
Engine
No Engine De-rating Required Below
10000.00 ft
3050.00 m
Peak Engine Torque Gross (SAE J1995)
1931.00 lbf-ft
2618.00 N·m
Peak Engine Torque Net (SAE J1349)
1887.00 lbf-ft
2558.00 N·m
Peak Engine Torque Speed
1200.00 rpm
1200.00 rpm
Transmission
Forward 8
23.50 mph
37.90 km/h
Forward 9
34.00 mph
54.80 km/h
Service Refill Capacities
Final Drives (each)
1.30 gal
5.00 L
Axles (each)
15.80 gal
60.00 L
Engine
Note
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note
Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Emissions
The 740 EJ meets Tier 4 Final/Stage IV emission standards.
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Sound Levels
Note
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Body Plate
Front
0.28 in
7.00 mm
Chute
0.55 in
14.00 mm
Side
0.43 in
11.00 mm
Base
0.55 in
14.00 mm
Optimal Loader/Truck Pass Matching
Hydraulic Excavator: 390 - Passes
4
Hydraulic Excavator: 374 - Passes
5
Wheel Loader: 982 - Passes
4
Wheel Loader: 980 - Passes
4–5
Wheel Loader: 972 - Passes
4–5
Note
An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Blade Eject/Retract
Eject (manual)
17.00 seconds
17.00 seconds
Eject (automatic)
16.00 seconds
16.00 seconds
Retract (manual)
21.00 seconds
21.00 seconds
Retract (automatic)
21.00 seconds
21.00 seconds
Engine
Engine Model
Cat® C18
Bore
5.70 in
145.00 mm
Stroke
7.20 in
183.00 mm
Displacement
1106.00 in³
18.10 l
Engine Model - U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014, Korea Tier 4 Final
Cat C18 ACERT
Gross Power - SAE J1995
511.00 HP
381.00 kW
Net Power - ISO 14396
504.00 HP
376.00 kW
Net Power - SAE J1349
496.00 HP
370.00 kW
Transmission
Forward - 1
3.80 mile/h
6.10 km/h
Forward - 2
5.00 mile/h
8.10 km/h
Forward - 3
7.00 mile/h
11.20 km/h
Forward - 4
8.80 mile/h
14.10 km/h
Forward - 5
11.60 mile/h
18.70 km/h
Forward - 6
14.20 mile/h
22.90 km/h
Forward - 7
19.60 mile/h
31.50 km/h
Body Plate
Type
High Strength Brinell HB450 Wear Resistant Steel
Service Refill Capacities
Fuel Tank
145.30 gal (US)
550.00 l
Cooling System
23.70 gal (US)
90.00 l
DEF Tank
5.30 gal (US)
25.00 l
Steering/Hoist Hydraulic System
36.90 gal (US)
140.00 l
Transmission - OTG
19.80 gal (US)
75.00 l
Brake Cooling Tank
17.70 gal (US)
67.00 l
Standards
Brakes
ISO 3450 – 2011
Steering
ISO 5010 – 2007
Turning Circle
Turning Dimensions - Steer Angle - Left/Right
45 deg
Transmission
Forward - 8
23.50 mile/h
37.90 km/h
Blade Eject/Retract
Eject (automatic)
16.00 s
16.00 s
Eject (manual)
17.00 s
17.00 s
Retract (automatic)
21.00 s
21.00 s
Retract (manual)
21.00 s
21.00 s
Engine
Emissions
The 740 EJ meets Tier 4 Final and Stage V emission standards.
No Engine De-rating Required Below
10000.00 ft
3050.00 m
Note (1)
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3)
Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (SAE J1995)
1931.00 ft·lbf
2618.00 N·m
Peak Engine Torque Net (SAE J1349)
1887.00 ft·lbf
2558.00 N·m
Peak Engine Torque Speed
1200.00 r/min
1200.00 r/min
Service Refill Capacities
Axles - Each
15.80 gal (US)
60.00 l
Final Drive - Each
1.30 gal (US)
5.00 l
Sound Levels
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Transmission
Forward - 9
34.00 mile/h
54.80 km/h
Engine
Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final
Cat C18
Features
MAXIMIZE PERFORMANCE
AUTOMATIC CONTROLS
HEAVY DUTY CONSTRUCTION
OPERATOR COMFORT AND CONTROL
BUILT TO PERFORM
TECHNOLOGY THAT GETS WORK DONE
BECAUSE UPTIME COUNTS
MORE SUSTAINABLE FUTURE
BUILT-IN SAFETY FEATURES
Sales Features
Ease of Operation
Designed for operators, by operatorsOperator Environment
Improved productivity with a comfortable and confident operatorEngine
Optimized performance, proven reliabilityTransmission
Class leading transmission technologyAutomatic Features
Ease of use, improved performanceSuspension and Braking
Performance with comfortVersatility
Pushing the operating envelopeDurability and Reliability
Proven structures and componentsIntegrated Technologies
Monitor, manage, and enhance job site operationsServiceability
Maximize uptime and reduce costsComplete Customer Support
A commitment to your successSustainability
Making sustainable progress possibleSafety
Designed into every machineStandard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- OPERATOR ENVIRONMENT
- Air conditioning with R134A refrigerant
- Windshield wiper and washer, two speed, intermittent (front)
- Windows opening side, tinted
- Adjustable air vents
- Two seat belts, operator's retractable
- Windshield wiper and washer, two speed (rear)
- Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind seat storage
– Coat hook - Mirrors: Extensive arrangement for improved visibility
- Tilt and telescopic steering wheel
- Sun visor
- Heater and defroster with variable speed fan
- Secondary steering – electro hydraulic
- Combined gear selection and eject control lever
- Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp - Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure
– Seat belt warning
– Secondary steering failure
– DPF regeneration filter
– Machine Security System (MSS)
– Secondary steering energy source engaged
– Hour meter
– Retarder active - Window blinds
- Glass windows: laminated and tinted-front toughened and tinted-sides and rear
- Touch screen display incorporating the rearview camera video feed
- Seats:
– Fully adjustable, air suspension, heated/cooled
– Padded trainer with lap belt
- CAT TECHNOLOGIES
- Product Link: PL631 (satellite) or PL641 (cellular) dependent on location and licensing agreement
- Cat Detect with Stability Assist
- ELECTRICAL AND LIGHTING
- Batteries (two) maintenance free
- Electrical system: 24 volt, 5A 24- to 12-volt converter
- Horn
- Lighting Systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light
– Two stop/tail lights
– Front and rear direction indicators - Main disconnect switch
- Remote starting receptacle (cables not included)
- POWER TRAIN
- Auto shift nine-speed forward and two reverse transmission
- Cat C18 engine
- Differentials: standard with automatic clutched inter and cross-axle differential locks
- Dual circuit oil immersed, enclosed brakes – all wheels
- Retarder: engine compression brake
- Three axle, six-wheel drive
- SAFETY
- Reverse alarm
- Rearview camera
- ROPS/FOPS cab
- GUARDS
- Rear window
- Radiator
- Crankcase
- Axle
- Front dump body spill guard, integral part of fabricated body
- OTHER STANDARD EQUIPMENT
- Mud flaps: wheel arch and body mounted with transportation tiebacks
- S·O·S sampling valves
- Tires, six 29.5R25, radial
- Vandalism protection: lockable caps for fuel tank and hydraulic oil tank
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- OPTIONAL EQUIPMENT
- Auto lube installation for automatic greasing of bearings
- Body liners
- Bluetooth radio stereo system
- Cat Production Measurement payload monitoring system
- Cold weather coolant –51° C (–60° F)
- Cold weather start attachment
- Engine block heater
- Ether start
- Exhaust heated body
- Fast fuel fill
- Fender extension
- Flashing LED beacon
- Four point seat belt
- Fuel additive – anti-waxing
- Heated rearview motorized mirrors
- Machine Security System (MSS)
- Product Link Elite: PLE631 (satellite), PLE641 (cellular)
- Roof mounted High Intensity Discharge (HID) work lights
- Sound suppression
- 875/65 R29 wide tires